若商品無標示價格，請向線上客服詢價|支持公司行號貨到付款 |註冊會員送100元購物金(內詳) 

1.支持Arduino IDE 1.0+ (OSX/Win/Linux)
2.能夠通過USB或者5v或者7-35v (自動匹配)額外電源供電
3.主機板上有 500ma 5V調節器
4.USB嵌入 (串口調試)
5.6個I/O Pins (2個用來支持USB)
6.8k Flash Memory (about 6k after bootloader)
7. I2C and SPI (vis USI)
8. PWM on 3 pins (more possible with Software PWM)
9. ADC on 4 pins
10.Power LED指示燈和Test/Status LED (在Pin0)

The Specs:

• Support for the IDE 1.0+ (OSX/Win/Linux)
• Power via USB or External Source - 5v or 7-35v (automatic selection)
• On-board 500ma 5V Regulator
• Built-in USB (and serial debugging)
• 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
• 8k Flash Memory (about 6k after bootloader)
• I2C and SPI (vis USI)
• PWM on 3 pins (more possible with Software PWM)
• ADC on 4 pins
• Power LED and Test/Status LED (on Pin0)